Cadex · Sniper Rifle
Cadex CDX-30 TAC
Bolt action · .308 Winchester · introduced 2018
Also known as CDX-30 TAC, Cadex CDX30-TAC, Cadex Tactical
About the Cadex CDX-30 TAC
The Cadex CDX-30 TAC is a bolt-action precision sniper rifle produced by Cadex Defence of Quebec, Canada, positioned as a cost-efficient tactical rifle for law enforcement and civilian long-range shooters. Built around the CDX-30 action with a 60-degree lift, three-lug bolt featuring radial fluting and a Sako-style extractor, it is chambered in .308 Winchester, 6mm Creedmoor, 6.5 Creedmoor, or 6.5 PRC. The rifle uses a match-grade Bartlein single-point-cut barrel with 5R Mil-Spec rifling in a Cadex 1.300-inch straight-taper fluted profile, threaded 5/8x24 to accept the included MX1 muzzle brake or a sound suppressor. The aircraft-grade 6061-T6 aluminum chassis integrates a V-shaped bedding system that eliminates movement between the action and chassis without traditional bedding, and carries a 20-MOA full-length top rail for maximum optic elevation. A tool-free adjustable stock provides length-of-pull, cheek-piece, and recoil-pad adjustment, and the rifle feeds from 10-round AICS-pattern detachable magazines (7 rounds in 6.5 PRC). The DX2 Evo trigger is selectable between single and double stage with a pull weight adjustable from 1.5 to 2.5 pounds.
The CDX-30 TAC anchors the accessible end of Cadex Defence's precision rifle family, bringing the Canadian maker's chassis engineering and Bartlein-barreled accuracy to police marksman units and competitive shooters who cannot justify the cost of the flagship Kraken or CR series. Its .308 Winchester chambering keeps it grounded as a versatile, ammunition-friendly tactical platform.
Cadex CDX-30 TAC specifications
General
- Type
- Sniper Rifle
- Action
- Bolt action
- Firing mechanism
- Striker-fired
- Trigger
- Two stage
- Trigger pull
- 0.9 kg (2.0 lb)
- Calibres
- .308 Winchester, 6.5mm Creedmoor
- Magazine capacity
- 10 rounds
- Magazine
- Detachable box magazine
Dimensions
- Barrel length
- 660 mm (26.0 in)
- Overall length
- 1218 mm (48.0 in)
- Weight (empty)
- 5.90 kg (13.00 lb)
Barrel
- Rifling twist
- 1:11 in (286 mm)
- Rifling
- Right hand
- Grooves
- 5
Materials
- Barrel
- Stainless steel
- Receiver / frame
- Aluminum chassis
- Stock
- Aluminum chassis
- Finish
- cerakote
Performance
- Muzzle velocity (typical)
- 810 m/s (2657 fps)
- Muzzle energy (typical)
- 3189 J (2352 ft·lb)
- Effective range
- 1100 m
History
- Introduced
- 2018
- Production status
- In production
- Country of origin
- CA
Available calibres
Features
- Free floating barrel
- Fluted barrel
- 3 lug bolt
- 60 degree bolt throw
- Sako style extractor
- Adjustable cheek piece
- Adjustable length of pull
- V bedding system
- Aics magazine compatible
- Muzzle brake
- Picatinny rail
- 20 moa rail
- Bipod compatible
- Bartlein barrel
- 5r rifling
- Suppressor ready
- Threaded barrel
Safety
- Two position safety
- Firing pin safety
The CDX-30 TAC is marketed as a lower-cost entry into the Cadex precision line, delivering the accuracy and reliability of the higher-end CDX rifles in a more affordable package. Barrel lengths of 20, 24, and 26 inches are offered depending on caliber, with corresponding overall lengths of roughly 44 to 48 inches and weights of 12.5 to 13.1 pounds. The .308 Win chambering uses a 1:11.25 twist as standard with 1:10 available on request. Cadex notes that final weight varies significantly by configuration and caliber.
Similar models

Barrett MRAD Covert
Bolt action · 6.5mm Creedmoor

Beretta Victrix Minerva
Bolt action · .308 Winchester

Bergara B-14 BMP
Bolt action · 6.5mm Creedmoor

Browning X-Bolt Target Max
Bolt action · 6.5mm Creedmoor
Cadex CDX-30 Guardian
Bolt action · .308 Winchester
Cadex CDX-30 X-LITE
Bolt action · 6.5mm Creedmoor

Cadex Defence CDX-R7
Bolt action · 6.5mm Creedmoor